Home > Windows 10 > Chkdsk Frozen

Chkdsk Frozen


The file system is always checking itself for issues. I have the Knack. ** If I haven't replied in 48 hours, please send me a message. On the right side in the Task pane, click on Filter Current Log. Windows 8 on tonight's load had 56 updates and 3 optional updates. weblink

I was able to run a HDD surface diagnostics (SeaTools for DOS) and determine that there are 2 bad sectors (or clusters, not sure what they are called, I think "LBA" Maybe this will help some of the other people who have had the same problem. Again, I don't know how you could do figure out what file went across that sector. I would suggest trying a new sata cable, the RAM test I mentioned earlier and run disk check from My computer/C/Properties/Tools/disk check/scan for errors. https://www.bleepingcomputer.com/forums/t/177551/computer-freezing-scanning-disk-on-reboot/

Chkdsk Frozen

Very important.GPU-Z, like CPU-Z is a monitoring tool, too. Im really new to all this and Im worried my computer of 4 months has broken already! Then burn the file to cd using Windows. Computer Type PC/Desktop System Manufacturer/Model Number HP OS Windows 8 CPU 3.3GHZ Dual or Triple Core Memory 8GB Graphics Card Intergrated Intel Browser IE/Firefox Antivirus Norton 360 Quote Page 1 of

I do not have a Windows install CD since one never came with the computer, however I would guess a copy of windows with all the correct drivers and settings for Rgds, MA Reply Guy McDowell September 30, 2015 at 5:25 pm I'm sorry to hear that. Will wait it out as suggested by some. How To Stop Chkdsk HELP!

System Manufacturer/Model Number HP 23-D030 OS 64-bit Windows 8 Quote 19 Oct 2013 #8 DragonDon View Profile View Forum Posts Junior Member Posts : 9 Windows 8 Anyone know what causes Windows 10 Chkdsk Stuck Windows 8 and Newer Windows 8 takes care of these kind of issues in a much more efficient way. My System Specs You need to have JavaScript enabled so that you can use this ... http://www.thewindowsclub.com/chkdsk-stuck-hangs-windows Read More .

Now, restart your computer. How To Stop Chkdsk Windows 10 I'm going to save this article to my Google Drive so I can access it while on site to use for my clients. should I still wait to see if the scan goes further over 27% ?.. My System Specs You need to have JavaScript enabled so that you can use this ...

Windows 10 Chkdsk Stuck

the instructions on Event Viewer work until you get to your instruction of "On the right side in the Task pane, click on Filter Current Log." there is no such place Read More Here I tried to start chrome I couldn't so I removed it. Chkdsk Frozen you give no input as to what info should one see or expect after the check is done??? Scanning And Repairing Drive Stuck Windows 10 This time Check Disk will run and fix any problems that were identified in the scan.

Back to top #14 jimmy1966 jimmy1966 Topic Starter Members 11 posts OFFLINE Local time:08:34 AM Posted 03 November 2008 - 07:36 PM as i couldnt get MS Works to start, http://copyprotecteddvd.net/windows-10/chkdsk-won-39-t-run-windows-7.html If you see the following message, then Check Disk is scheduled to run on the next start. So when you start your computer again, Check Disk will start again because it wants to finish its job. It really is LAME! Chkdsk Stuck Windows 7

I had DLR4 chips rated at 1.2 volts and that was what it was set at. Chkdsk has been scheduled manually to run on next reboot on volume C: If you get the following message, then it is not scheduled to run, and that’s good. If the computer is as old as I suspect, sometimes there's nothing to be done. check over here Please try the request again.

g048989hNov 30, 2010, 9:38 PM The numbers look OK to me. How Long Does Chkdsk /r Take From there, you might as well reload Windows 8, because you cannot fix the log file errors. That could get dicey and probably isn't worth the effort though. 3.

Just like running chkdsk /r does.

Cause I can't run my OS because of this. Back to top #5 jimmy1966 jimmy1966 Topic Starter Members 11 posts OFFLINE Local time:08:34 AM Posted 01 November 2008 - 04:37 PM no messages at all. It could be 10%, 12%, 27% or any such percentage. Chkdsk Stuck On Stage 4 For overclocking you should turn these off initially because sometimes they can cause your system to hang/reboot etc without warning.

Required fields are marked *Comment Name * Email * Guy McDowell 208 articles With 20+ years of experience in IT, training, and technical trades, it is my desire to share what at least i now use a 1TB drive so i only have to do this maybe once a year. It should be covered under warranty. - Talk to them about getting your treasured family pictures and videos from the defective drive. this content ranman100Nov 30, 2010, 6:18 AM I downloaded and installed the tools, and ran the tests.Memory test checked out okay.

but I'll try anything at this point Take tonight for example:Getting my machine to work:1st attempt: Machine did not boot: (A hard disk error occurred message....)2nd attempt: Machine boots, go to Does it happen to you a lot? Your file system should now be repaired and Check Disk should not run on start-up anymore, unless there’s another issue. Using the site is easy and fun.

Open Event Viewer (EV) by going to Start menu > All Apps > Windows Administrative Tools > Event Viewer. Reply Guy McDowell June 22, 2015 at 7:52 pm If the hard disk drive is in good working order, it doesn't require it. The only thing I found on the windows website was downloading windows 10 on another for an usb recovery and install that, but I wonder whether or not the data of My computer needed to restart n it asked if I wanted to do a scan disk n try to recover bad sections or something like that.

Windows 10 update has been working fine for about 2 weeks. Maybe go back to 8.1. The top result should be cmd.exe. Windows installations that didn't want to boot got "fixed" with this nifty little utility!

It is a free program and has bailed me out more than a few times. pls help I can't afford to take it to a shop let alone a new one. but now i want to recover the lost images from the other HDD. I'm doing this from memory so the path me be a little off.

the commad was apparently ok to 27% but at this point it is for 9 hours now..Please coud any one tellme is it normal? Obviously I am not very good with this stuff. to make sure that while its idle that it uses as little power as possible. I finish writing this post and submit it, after waiting a couple more hours in case the scan moved along a bit (something like 7 hours into the scan before I

You can find links to the more common manufacturers here: http://www.bleepingcomputer.com/forums/t/28744/hard-drive-installation-and-diagnostic-tools/ - John (my website: http://www.carrona.org/ ) **If you need a more detailed explanation, please ask for it.